How to make the cutest and (fluffiest!) yarn wrapped Christmas tree decor.
This is one of my easiest holiday DIYs yet! These Styrofoam yarn trees can be changed up with any material you’d like to use.
I wanted some new holiday decor for our basement but didn’t want to spend a
ton of money — I came up with this idea and they turned out better than I
imagined.
At first I was going to use basic yarn on Styrofoam cones, but wanted a
fluffier look.
Enter this finger knit yarn I’ve had forever — for the blanket I still
haven’t made yet, ha!:
It is SO so soft and fluffy and I had an idea — I wondered how it would work
wound around the cones instead of regular yarn. Well, I’ll tell you…it
worked ADORABLE. 😁
This post may contain affiliate links for your convenience.
I may earn a small commission when you make a purchase through links.
These DIY yarn Christmas trees are quick to make with just a few easy steps.
I started with basic craft foam forms:
And used my hot glue gun to attach the yard at the bottom of the cone first:
I started the first line of yarn about an inch from the bottom because this yarn drapes so
much.
I went up about 3/4 inch to an inch each pass around the cone:
Just do a bead of hot glue and then lightly press the top portion of the yarn
along the glue.
I just kept wrapping…this was a great mindless craft to do while watching
TV.
When I got to the top of the very top of the cone, I cut just enough excess yarn and then wrapped it up on the very tip with hot glue.
This finger knit looped stuff is very forgiving!
I did three different sizes — one was about six inches, one was
11 inches and the final was about 17 inches but I cut those two down a bit:
I used one skein of yarn for all the trees and had a bit leftover. It’s like a snowy, fluffy forest! 🙂 I think they are the cutest.
You
don’t even have to do anything to cover the white foam — it disappears
behind the yarn:
I giggled every time I finished one. They are adorable and SO easy and
inexpensive!
The foam products are often on sale, or you can use a coupon at
one of the craft stores.
fairy lights I showed you here
for a bit of twinkle:
You can also have them glow from “inside” by running those tiny lights
under the yarn around the tree:
You can dress this Christmas tree craft up in so many ways!
- Add a pop of color by sticking in red beads here and there to look like berries.
- Use embellishments like these adorable tiny plaid bows, mini pine cones or holly berry leaves throughout the trees. (I may have to add those bows!)
- This would be a REALLY cute idea for a kid’s room in a variety of bright colorful yarns.
- Stick a small dowel rod into the top with a star or angel glued on for a finishing touch.
- Pom poms glued all around or attached with pins would be adorable as well!
I wanted something simple but fun on this table in our basement and these
were perfect!
I went super cozy and a bit rustic with the decor down there, so they fit
right in:
I love our “snowy” fluffy trees! I think they may have to go on the mantel next year instead. 🙂
You can pin this craft for later using this image:
Now I’m off to make a scarf with the remaining yarn I have! 😉